5ļ¼12
JMA-9100 Instruction Manual > 5.OPERATION OF TARGET TRACKING AND AIS > 5.1 PREPARATION
5.1.4.3 Operation of AUTO Mode
As shown below, the AUTO mode performs operation in accordance with the
object at the cursor position when left-clicked.
The AUTO mode permits to access that you want by intuitive operation.
Object at Cursor Position Operation
None Acquires a target.
EBL EBL operation.
VRM VRM operation.
Intersection point of EBL
and VRM
Performs EBL operation and VRM operation at
the same time.
Parallel index line Operates the parallel index line.
Tracked target Displays the numeric data of the tracked target.
Tracked target with
numeric data displayed
Hides the numeric data.
Sleeping AIS target Activates the AIS target.
Activated AIS target Displays the AIS target information.
AIS target with numeric
data displayed
Hides the AIS target information.
Automatic acquisition /
activation zone
Operates the automatic acquisition / activation
zone.
AIS filter Operates the AIS filter zone.
To Next Page
Loading...
Need help?
General
