JMA-9100 Instruction Manual > C.Menu Index > C.9 Serviceman Menu
C－15
C
│││├3. TTD(TT)
│││├4. TLB(TT)
│││├5. OSD
│││├6. RSD
│││├7. ALR
│││├8. ACK
│││├9. Next
│││├1. TTM(AIS)
│││├2. TLL(AIS)
│││├3. TTD(AIS)
│││├4. TLB(AIS)
│││├5. Remote Maintenance
│││├6. JRC-ARPA
│││├7. NMEA0183 Output Format
│││├8. NMEA0183 Talker
│││├9. Next
│││├1. NMEA0183 TX Interval
│││├2. APB
│││├3. BOD
│││├4. GGA
│││├5. GLL
│││├6. RMC
│││├7. RMB
│││├8. VTG
│││├9. Next
│││├1. XTE
│││├2. BWC
│││├3. HDT
│││└4. THS
││├7. Line Monitor
│││├1. COMPASS
│││├2. MAINTENANCE/LOG
│││├3. NAV1
│││├4. NAV2
│││├5. ALARM
│││├6. JARPA
│││├7. AIS
│││├8. BRIDGE NET
│││├9. Next
│││├1. ARPA
│││├2. COM
│││├3. TXRX/ISW
│││├4. KEYBOARD1
│││└5. KEYBOARD2
│├6. Alarm System - - - - - - - - - - - - - - - - - - - - - - - - -
section 7.2.9 on page 7-22
││├1. Watch Alarm
│││├1. Reset Interval - - - - - - - - - - - - - - - -
section 7.2.9.1 on page 7-22
│││└2. Trackball Threshold - - - - - - - - - - - - - section 7.2.9.2 on page 7-22
││├2. Relay Output - - - - - - - - - - - - - - - - - - - - section 7.2.9.3 on page 7-23
│││├1. Relay Output Mode
│││├2. TT CPA/TCPA
│││├3. AIS CPA/TCPA
│││├4. New Target
│││├5. Lost
│││└6. RADAR Alarm
││├3. ALR Output - - - - - - - - - - - - - - - - - - - - -
section 7.2.9.4 on page 7-23
│││├1. System Alarm
│││└2. TT/AIS Alarm
││├4. Sound Output Mode - - - - - - - - - - - - - - - - -
section 7.2.9.6 on page 7-25
││├5. External ACK Setting - - - - - - - - - - - - - - - - section 7.2.9.5 on page 7-24
│││├1. Critical Alarm
││││├1. Audio
││││├2Indication
││││└3. Acknowledge State
│││├2. Normal Alarm
││││├1. Audio
││││├2. Indication
││││└3. Acknowledge State
│├7. Inter Switch
││├1. ISW Install
To Next Page
Loading...
