Juniper QFX5100 - Page 128

Table 38: Optical Interface Support for 10-Gigabit Ethernet SFP+ Transceivers for the QFX
Series (continued)
Specifications
Standards
Compliance
QFX-SFP-10GE-LRProduct SKU
number
10GBASE-LR
QFX3500
QFX5100-24Q (management ports only)
QFX5100-48S
QFX5100-48T (management port only)
QFX5100-96S
Supported models
9.95328 GBd +/- 20 ppm
10.3125 GBd +/- 100 ppm
Signaling rate
LC/UPCConnector type
1Fiber pairs
1260 nm to 1355 nmCenter wavelength
(range)
-8.2 dBmAverage transmit
launch power
(minimum)
0.5 dBmAverage transmit
launch power
(maximum)
-14.4 dBmAverage receive
power (minimum)
0.5 dBmAverage receive
power (maximum)
-12.6 dBmReceiver sensitivity
(OMA) maximum)
-10.3 dBmStressed receiver
sensitivity
(maximum) in
OMA
AvailableDOM support
SMFFiber type
Copyright © 2016, Juniper Networks, Inc.108
QFX5100 Switch Hardware Guide