Table 39: Interface Support for 40-Gigabit Ethernet QSFP+ Transceivers for the QFX
Series (continued)
Specifications
Standards
Compliance
JNP-QSFP-40G-LR4Product SKU number40GBASE-LR4
QFX3500
QFX3600
QFX3600-I
QFX5100-24Q
QFX5100-48S
QFX5100-48T
QFX5100-96S
Supported models
10.3125 GBd +/- 100 ppmSignaling rate
LC/PCConnector type
1Fiber pairs
Lane 0–1264.5 nm through 1277.5 nm
Lane 1–1284.5 nm through 1297.5 nm
Lane 2–1304.5 nm through 1317.5 nm
Lane 3–1324.5 nm through 1337.5 nm
Lane wavelength
-7.0 dBmAverage transmit launch
power, each lane (minimum)
2.3 dBmAverage transmit launch
power, each lane (maximum)
-13.7 dBmAverage receive power, each
lane (minimum)
2.3 dBmAverage receive power, each
lane (maximum)
-11.5 dBmReceiver sensitivity (OMA),
each lane (maximum)
-9.6 dBmStressed receiver sensitivity
(OMA) each lane(maximum)
AvailableDOM support
119Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Port and Interface Specifications
To Next Page
Loading...
