Table 50: Interface Specifications for Passive Copper QSFP+ DAC Cables (continued)
SpecificationsProduct Number
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DAC-5M
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.015 WPower consumption (per end)
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
26 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
1% maximumCrosstalk between pairs
4.3 nsec/mTime delay
5 m (16.4 ft)Length
143Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Port and Interface Specifications
To Next Page
Loading...
