Table 51: Interface Specifications for Active Copper QSFP+ DAC Cables (continued)
SpecificationsProduct Number
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DAC-10MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.058 WPower consumption
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
28 AWGWire AWG
0.3 in. (0.762 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2 % maximumCrosstalk between pairs
4.3 nsec/mTime delay
10 m (32.8 ft)Length
Related
Documentation
• Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX Series on
page 94
• Interface Specifications for SFP+ DAC Cables for the QFX Series on page 126
• Interface Specifications for QSFP+ DAC Breakout Cables for the QFX Series on page 135
• Installing a Transceiver in a QFX Series Device on page 214
• Removing a Transceiver from a QFX Series Device on page 213
145Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Port and Interface Specifications
To Next Page
Loading...
