Table 9: QFX-PFA-4Q Status and FPGA LEDs (continued)
DescriptionStateLED
Application-specific status is off.OffS0 and S1
Application-specific status is on.Green
Related
Documentation
• Installing an Expansion Module in a QFX5100 Device on page 207
• Removing an Expansion Module from a QFX5100 Device on page 210
• Installing and Removing QFX5100 Device Hardware Components on page 201
• Configuring the System Mode
Copyright © 2016, Juniper Networks, Inc.38
QFX5100 Switch Hardware Guide
To Next Page