•
Avoid contact between the component and your clothing. ESD voltages emitted from
clothing can damage components.
•
When removing or installing a component, always place it component-side up on an
antistatic surface, in an antistatic card rack, or in an electrostatic bag. See
Figure 19 on page 119. If you are returning a component, place it into an electrostatic
bag before packing it.
Figure 19: Placing a Component into an Electrostatic Bag
Related
Documentation
• SRX1500 Services Gateway Definition of Safety Warnings Levels on page 113
• SRX1500 Services Gateway General Safety Guidelines and Warnings on page 115
• SRX1500 Services Gateway SafetyRequirements, Warnings, and Guidelines on page 116
119Copyright © 2017, Juniper Networks, Inc.
Chapter 23: General Safety Information
To Next Page
Loading...
