Keithley 2110 User Manual

Model 2110
5½ Digit Multimeter Reference Manual Section 5:
Remote commands
2110-901-01 Rev. C/August 2013 5-35
[SENSe:]AVERage:STATe <b>
Use this command to turn the digital filter on or off.
Parameters
<b> description
0 or OFF
Turn the digital filter off.
1 or ON
Turn the digital filter on.
Query
command description
[SENSe:]AVERage:STATe?
Query the state of the digital filter. Returns 0 (off) or 1 (on).
Details
Refer to Digital filter (on page 3-47) for more information about using this command.
[SENSe:]AVERage:TCONtrol <name>
Use this command to select the digital filter type.
Parameters
<name> description
MOVing
Select the moving average filter.
REPeat
Select the moving average filter.
Query
command description
[SENSe:]AVERage:TCONtrol?
Query the type of digital filter. Returns 0 (off) or 1 (on).
Details
Refer to Digital filter (on page 3-47) for more information about using this command.

Keithley 2110 Specifications

General

Model	2110
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Continuity	Yes
Diode Test	Yes
Category	Digital Multimeter
Display	5.5 digit
DC Current Range	100 µA to 3 A
AC Current Range	100 µA to 3 A
Resistance Range	100 MΩ
Frequency Range	3 Hz to 300 kHz
Frequency Accuracy	0.01% + 1 count
Capacitance Range	1 nF to 100 µF
Capacitance Accuracy	1% + 5 counts
Connectivity	USB, GPIB (optional)
Dimensions	88 mm
Power Supply	100 V to 240 V AC, 50/60 Hz
DC Voltage Accuracy	±0.012% + 2 counts