Keithley 2110 User Manual

Model 2110
5½ Digit Multimeter Reference Manual Section 5:
Remote commands
2110-901-01 Rev. C/August 2013 5-51
[SENSe:]TCOuple:TYPE <name>
Use this command to select thermocouple sensor type.
Parameters
<name> description
B
Thermocouple type B.
C
Thermocouple type C.
E
Thermocouple type E.
J
Thermocouple type J.
K
Thermocouple type K.
N
Thermocouple type N.
R
Thermocouple type R.
S
Thermocouple type S.
T
Thermocouple type T.
Query
command description
[SENSe:]TCOuple:TYPE?
Query thermocouple sensor type. Returns type parameter.
Details
Refer to Thermocouple measurements (on page 3-22) for information about thermocouple types.
Example
TCOuple:TYPE J
Select type J.
Also see
[SENSe:]UNIT <name> (on page 5-60)
[SENSe:]TCOuple:RJUNction:RSELect <name> (on page 5-50)

Keithley 2110 Specifications

General

Model	2110
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Continuity	Yes
Diode Test	Yes
Category	Digital Multimeter
Display	5.5 digit
DC Current Range	100 µA to 3 A
AC Current Range	100 µA to 3 A
Resistance Range	100 MΩ
Frequency Range	3 Hz to 300 kHz
Frequency Accuracy	0.01% + 1 count
Capacitance Range	1 nF to 100 µF
Capacitance Accuracy	1% + 5 counts
Connectivity	USB, GPIB (optional)
Dimensions	88 mm
Power Supply	100 V to 240 V AC, 50/60 Hz
DC Voltage Accuracy	±0.012% + 2 counts