Keithley 2110

Section
5: Remote commands Model 2110 5½ Digit Multimeter
Reference Manual
5-54 2110-901-01 Rev. C/August 2013
[SENSe:]TEMPerature:RTD:BETA <n>|MIN|MAX
Use this command to select the beta coefficient for the user-defined RTD type.
Parameters
<n> description
0 to 1
Select the beta coefficient.
MINimum
Select the minimum coefficient.
MAXimum
Select the maximum coefficient.
Query
command description
[SENSe:]TEMPerature:RTD:BETA?
Query the beta coefficient for the user-defined RTD
type.
[SENSe:]TEMPerature:RTD:BETA? MIN
Query the minimum beta coefficient for the
user-defined RTD type.
[SENSe:]TEMPerature:RTD:BETA? MAX
Query the maximum beta coefficient for the
user-defined RTD type.
Details
Refer to the following topic in the Temperature measurement (on page 3-17) section for more information about
RTD type: RTD coefficients and temperature calculation (on page 3-19).
[SENSe:]TEMPerature:RTD:DELTa <n>|MIN|MAX
Use this command to select the delta coefficient for the user-defined RTD type.
Parameters
<n> description
0 to 5
Select the delta coefficient.
MINimum
Select the minimum coefficient.
MAXimum
Select the maximum coefficient.
Query
command description
[SENSe:]TEMPerature:RTD:DELTa?
Query the delta coefficient for the user-defined RTD
type.
[SENSe:]TEMPerature:RTD:DELTa? MIN
Query the minimum delta coefficient for the
user-defined RTD type.
[SENSe:]TEMPerature:RTD:DELTa? MAX
Query the maximum delta coefficient for the
user-defined RTD type.
Details
Refer to the following topic in the Temperature measurement (on page 3-17) section for more information about
RTD type: RTD coefficients and temperature calculation (on page 3-19)