Keithley 2110

Model 2110
5½ Digit Multimeter Reference Manual Section 5: Remote comman
ds
2110-901-01 Rev. C/August 2013 5-37
[SENSe:]CURRent:AC:RANGe <range>|MIN|MAX
Use this command to select the function (ACI) and set a measurement range.
Parameters
<n> description
0 to 10
Select the measurement range in amps.
MINimum
Select the minimum value.
MAXimum
Select the maximum value.
Query
command description
[SENSe:]CURRent:AC:RANGe?
Query the measurement range.
[SENSe:]CURRent:AC:RANGe? MIN
Query the minimum range.
[SENSe:]CURRent:AC:RANGe? MAX
Query the maximum range.
[SENSe:]CURRent:AC:RESolution <n>|MIN|MAX
Use this command to select the resolution for AC current measurements (ACI).
Parameters
<n> description
(1.00e-06 to 1.00e-04) * ACI range
Select the resolution of the measurement.
MINimum
Select the minimum value.
MAXimum
Select the maximum value.
Query
command description
[SENSe:]CURRent:AC:RESolution?
Query the measurement resolution.
[SENSe:]CURRent:AC:RESolution? MIN
Query the minimum resolution.
[SENSe:]CURRent:AC:RESolution? MAX
Query the maximum resolution.
Details
Refer to Bandwidth and resolution for AC measurements (on page 3-44) for more information about resolution.