Name: Keithley 2110
Brand: Keithley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Section

3: Basic DMM operation Model 2110 5½ Digit Multimeter

Reference Manual

3-28 2110-901-01 Rev. C/August 2013

Remote operation

The following command is used to select a primary or secondary function:

FUNction[1|2] "function"

When you use the number one (1) or no number, the primary function is selected. When you use the

number two (2), the secondary function is selected. Here are some examples:

FUNCtion "VOLTage[:DC]" Selects DCV as primary function

FUNCtion1 "VOLTage[:DC]" Selects DCV as primary function

FUNCtion2 "VOLTage[:DC]" Selects DCV as secondary function

Use the following commands to select a primary or secondary function:

FUNCtion[1|2] "VOLTage[:DC]" DCV function

FUNCtion[1|2] "VOLTage:AC" ACV function

FUNCtion[1|2] "CURRent[:DC]" DCI function

FUNCtion[1|2] "CURRent:AC" ACI function

FUNCtion[1|2] "FREQuency" FREQ function

FUNCtion[1|2] "FREQuency[:VOLT]" FREQ function (voltage input)

FUNCtion[1|2] "FREQuency:CURR" FREQ function (current input)

FUNCtion[1|2] "PERiod" PERIOD function

FUNCtion[1|2] "PERiod[:VOLT]" PERIOD function (voltage input)

FUNCtion[1|2] "PERiod:CURR" PERIOD function (current input)

FUNCtion[1|2] "RESistance" Ω2 function

FUNCtion[1|2] "FRESistance" Ω4 function

FUNCtion[1|2] "CAPacitance" Capacitance function

FUNCtion[1|2] "TEMPerature" TEMP (RTD) function

FUNCtion[1|2] "TCOuple" Thermocouple function

FUNCtion[1|2] "NONE" Disable second function

FUNCtion[1|2]? Query the selected primary or secondary function

Triggering and data buffer

Triggering is used to initiate one or more measurements by the instrument. Up to 2000 readings can

be stored in the data buffer (memory).

You can control instrument trigger operation from the front panel or through a remote interface.

Other manuals for Keithley 2110

Questions and Answers:

Need help?

Do you have a question about the Keithley 2110 and is the answer not in the manual?

General