1: Introduction Model 2110 5½ Digit Multimeter
1-4 2110-901-01 Rev. C/August 2013
Measurement ranges and functions
The Model 2110 provides a wide number of measurement ranges and functions including:
• DC voltage: 0.1 V, 1 V, 10 V, 100 V, and 1000 V
• AC voltage: 0.1 V, 1 V, 10 V, 100 V, and 750 V
• DC current: 10 mA, 100 mA, 1 A, 3 A, and 10 A
• AC current: 1 A, 3 A, and 10 A
• Two and 4-wire resistance: 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ, 1 MΩ, 10 MΩ, and 100 MΩ
• Frequency: 3 Hz to 300 kHz
• Capacitance measurement: 1 nF, 10 nF, 100 nF, 1 μF, 10 μF, 100 μF, 1 mF, 10 mF
• Temperature measurement using RTDs, thermistors, and thermocouples (direct measurement
using built-in cold junction compensation to improve accuracy); supports J-, R-, S-, T-, E-, N-, B-,
C-, and K-type thermocouples
• Period measurement
• Diode measurement
• Continuity measurement
• Programmable A-D converter and filter settings for signal-to-noise optimization
Mathematical operations
The Model 2110 allows you to perform the following seven mathematical operations on measurement
readings: Percentage, Average (Min/Max, Count), NULL, Limits, mX+b, dB, and dBm.
Startup software and PC utilities
The following start-up software and PC utilities are included:
• KI-Tool and KI-Link software allow you to quickly control the instrument over GPIB (if equipped)
or USB, record measurements, and display time-series plots of the data. KI-Link is an add in for
Microsoft
®
Word and Microsoft Excel.
• LabVIEW
TM
and IVI drivers allow more advanced customers even more control over the
instrument.
Standard accessories
The following standard accessories are supplied with the Model 2110.
• Safety test leads
• USB cable
• Power cable
To Next Page
