14
Status Structure
• Overview — Provides an operational overview of the status structure for the
Model 2500.
• Clearing registers and queues — Covers the actions that clear (reset) registers and
queues.
• Programming and reading registers — Explains how to program enable registers and
read any register in the status structure.
• Status byte and service request (SRQ) — Explains how to program the status byte to
generate service requests (SRQs). Shows how to use the serial poll sequence to detect
SRQs.
• Status register sets — Provides bit identification and command information for the
four status register sets: standard event status, operation event status, measurement
event status, and questionable event status.
• Queues — Provides details and command information on the output queue and error
queue.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
