To Next Page

To Previous Page

Models 2500 and 2502 User’s Manual SCPI Command Reference 17-81

SYSTem subsystem

The SYSTem subsystem contains miscellaneous commands that are summarized in

Table 17-8.

Default conditions

PRESet

:SYSTem:PRESet Return to :SYSTem:PRESet defaults

Description This command returns the instrument to states optimized for front panel

operation. :SYSTem:PRESet defaults are listed in the SCPI tables

(Table 17-1 through Table 17-10).

POSetup

:SYSTem:POSetup <name> Program power-on defaults

Parameters <name> = RST Power-up to *RST defaults

PRESet Power-up to :SYSTem:PRESet defaults

SAV0 Power-up to setup stored at memory location 0

SAV1 Power-up to setup stored at memory location 1

SAV2 Power-up to setup stored at memory location 2

SAV3 Power-up to setup stored at memory location 3

SAV4 Power-up to setup stored at memory location 4

Query :POSetup? Query power-on setup

Description This command is used to select the power-on defaults. With RST

selected, the instrument powers up to the *RST default conditions. With

PRES selected, the instrument powers up to the :SYStem:PRESet

default conditions. Default conditions are listed in the SCPI tables

(Table 17-1 through Table 17-10).

With the SAV0-4 parameters speciﬁed, the instrument powers-on to the

setup that is saved in the speciﬁed location using the *SAV command.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

Keithley 2500 User Manual

Other manuals for Keithley 2500