17-84 SCPI Command Reference Models 2500 and 2502 User’s Manual
Simulate key presses
KEY
:SYSTem:KEY <NRf> Simulate key-press
Parameters <NRf> = 1 RANGE
key
2 EDIT
key
3 EDIT key
4 MENU key
5 DELTA key
6 FILTER key
7 SPEED key
8 CHANNEL SELECT key
9AUTO key
10 EDIT
key
11 EXIT key
12 SRC1 key
13 LIMITS key
14 STORE key
15 MSR1 key
16 DISPLAY TOGGLE key
17 RANGE
key
18 ENTER key
19 SRC2 key
20 TRIG key
21 RECALL key
22 MSR2 key
23 LOCAL key
24 ON/OFF key
25 -----
26 EDIT
key
27 SWEEP key
28 CONFIG key
29 RATIO
30 REL key
31 DIGITS key
Query :KEY? Query last pressed key.
Description This command is used to simulate front panel key presses. For example,
to select the channel 1 measurement function (MSR1), you can send the
following command to simulate pressing the MSR1 key:
:syst:key 15
The parameter listing above provides the key-press code in numeric
order.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
