Keithley 2500 - Page 29

List of Tables
1 Getting Started
Table 1-1 Line fuses ............................................................................. 1-13
Table 1-2 Basic display commands ...................................................... 1-15
Table 1-3 Factory default settings ........................................................ 1-17
Table 1-4 Main menu ........................................................................... 1-20
Table 1-5 Measurement configuration menus ...................................... 1-25
Table 1-6 Source configuration menus ................................................. 1-26
Table 1-7 Rel, filter, and range configuration menus ........................... 1-26
Table 1-8 Limit configuration menu .................................................... 1-27
Table 1-9 Trigger configuration menu ................................................. 1-28
Table 1-10 Sweep, digits, speed, and data store configuration menus ... 1-29
Table 1-11 Output and display configuration menus ............................. 1-30
3 Basic Operation
Table 3-1 Current measurement ranges ................................................. 3-2
Table 3-2 Voltage source ranges ............................................................ 3-2
Table 3-3 Auto source delay .................................................................. 3-5
Table 3-4 Source delay commands ........................................................ 3-7
Table 3-5 Ground connect commands ................................................... 3-8
Table 3-6 Basic measurement and voltage source commands ............. 3-13
Table 3-7 Basic measurement command sequence .............................. 3-14
Table 3-8 Analog output voltage examples .......................................... 3-14
4 Photodiode Measurements
Table 4-1 MSR1 and MSR2 configuration menus ................................. 4-2
Table 4-2 Photodiode measurement commands ..................................... 4-6
Table 4-3 Basic measurement command sequence ................................ 4-8
6 Range, Digits, Speed, and Filters
Table 6-1 Current measurement ranges ................................................. 6-2
Table 6-2 Range and digits commands .................................................. 6-4
Table 6-3 Range and digits programming example ............................... 6-5
Table 6-4 Speed commands ................................................................... 6-7
Table 6-5 Filter configuration menu ..................................................... 6-12
Table 6-6 Filter commands .................................................................. 6-13
Table 6-7 Filter programming example ............................................... 6-14
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com