10-16 SCPI Command Reference Models 2510 and 2510-AT User’s Manual
:STATe <b>
:DISPlay[:WINDow[1]]:TEXT:STATe <b> Control message; top display
:DISPlay:WINDow2:TEXT:STATe <b> Control message; bottom display
Parameters <b> = 0 or OFF Disable text message for specified
display
1 or ON Enable text message for specified
display
Query :STATe? Query state of message mode for specified
display
Description These commands enable and disable the text message modes. When
enabled, a defined message is displayed. When disabled, the message is
removed from the display.
GPIB Operation — A user defined text message remains displayed
only as long as the instrument is in remote. Taking the instrument out of
remote (by pressing the DISPLAY TOGGLE/LOCAL key or sending
LOCAL 15) cancels the message and disables the text message mode.
RS-232 Operation — A user defined test message can be cancelled by
sending the :SYSTem:LOCal command or pressing the LOCAL key.
To Next Page
