1-12 Getting Started Models 2510 and 2510-AT User’s Manual
Resistance function readings
The resistance function displays measured RTD and thermistor sensor resistances, as well
as setpoint resistances, and you can use the DISPLAY TOGGLE key to cycle among:
• Temperature
• Peltier voltage
• Peltier current
• Peltier power
• Peltier resistance
Reading format
Reading information on the top line of the front panel display can be displayed using
either engineering units or scientific notation in either fixed- or floating-point format. Use
the GENERAL/NUMBERS selection of the main MENU to select the display format, as
discussed under “Menus,” page 1-19.
Engineering units example: 1.23456µA
Scientific notation example: 1.23456e -6
See “FORMat subsystem,” page 10-19, for remote reading formats.
To Next Page
Loading...
