3
Basic Operation
• Safety precautions — Lists safety precautions that should be observed when using
the unit.
• Operation overview — Summarizes the basic operating characteristics of the
Model 2510.
• Configuring functions — Provides step-by-step procedures for configuring the
Model 2510 temperature, voltage, current, and resistance functions.
• Adjusting setpoints — Provides basic information on adjusting setpoints and
allowable setpoint ranges.
• Basic front panel control-measure procedure — Describes the basic procedure
for setting up unit control and measurement operating modes and using the unit
from the front panel.
• Basic remote control-measure procedure — Describes the basic procedure for
setting up unit control and measurement operating modes and using the unit using
remote commands.
• Protection limits — Discusses the protection limits for the various functions.
• Setpoint tolerances — Details using the setpoint tolerance to determine when the
control setting is within the desired setpoint window.
• Temperature sensors — Covers various aspects of temperature sensors.
To Next Page
Loading...
Need help?
General
