Keithley 2510 User Manual

Models 2510 and 2510-AT User’s Manual SCPI Command Reference 10-37
Query [:GAIN]? Query proportional constant
:DERivative? Query derivative constant
:INTegral? Query integral constant
Description These commands program the resistance function PID loop constants,
which must be set to appropriate values for suitable control characteris-
tics. See Section 4, PID Control Concepts, for information on choosing
appropriate values.
:PROTection
:SOURce[1]:RESistance:PROTection[:HIGH][:LEVel] <n> Program resistance high limit
:SOURce[1]:RESistance:PROTection[:HIGH]:TRIPped? Query if high limit exceeded
:SOURce[1]:RESistance:PROTection:LOW[:LEVel] <n> Program resistance low limit
:SOURce[1]:RESistance:PROTection:LOW:TRIPped? Query if low limit exceeded
:SOURce[1]:RESistance:PROTection:STATe <b> Enable/disable protection
Parameters [:HIGH] <n> = 50 to 1.000e3Ω 100Ω thermistor
500 to 9.999e3Ω 1kΩ thermistor
5.000e3 to 8.000e4Ω 10kΩ thermistor
5.000e4 to 2.000e5Ω 100kΩ thermistor
50 to 250Ω 100Ω RTD
500 to 3.000e3Ω 1kΩ RTD
MINimum 50Ω (100Ω RTD or thermistor)
500Ω (1kΩ RTD or thermistor)
5.000e3Ω (10kΩ thermistor)
5.000e4Ω (100kΩ thermistor)
MAXimum 1.000e3Ω (100Ω thermistor)
9.999e3Ω (1kΩ thermistor)
8.000e4Ω (10kΩ thermistor)
2.000e5Ω (100kΩ thermistor)
250Ω (100Ω RTD)
3.000e3Ω (1kΩ RTD)
DEFault 200Ω (100Ω RTD or thermistor)
2e3Ω (1kΩ RTD or thermistor)
2e4Ω (10kΩ thermistor)
2e5Ω (100kΩ thermistor)
:LOW <n> = 1 to 200Ω 100Ω RTD or thermistor
5 to 2.000e3Ω 1kΩ RTD or thermistor
50 to 2.000e4Ω 10kΩ thermistor
500 to 2.000e5Ω 100kΩ thermistor
MINimum 1Ω (100Ω RTD or thermistor)
5Ω (1kΩ RTD or thermistor)
50Ω (10kΩ RTD or thermistor)
500Ω (100kΩ thermistor)
MAXimum 200Ω (100Ω or RTD thermistor)
2.000e3Ω (1kΩ RTD or thermistor)
2.000e4Ω (10kΩ thermistor)
2.000e5Ω (100kΩ thermistor)

Keithley 2510 Specifications

General

Brand	Keithley
Model	2510
Category	Measuring Instruments
Language	English