Keithley 2510

Models 2510 and 2510-AT User’s Manual Example Programs E-7
' Step 7: Request readings.
CLS
PRINT "Waiting 30 seconds for TEC to stabilize..."
SLEEP 30
PRINT #1, "OUTPUT 15;:MEAS:POW?" ' Query TEC power.
PRINT #1, "ENTER 15"
INPUT #2, R
PRINT "TEC power:"; R
PRINT #1, "OUTPUT 15;:MEAS:CURR?" ' Query TEC current.
PRINT #1, "ENTER 15"
INPUT #2, R
PRINT "TEC current:"; R
PRINT #1, "OUTPUT 15;:MEAS:TEMP?" ' Query temperature.
PRINT #1, "ENTER 15"
INPUT #2, R
PRINT "Temperature:"; R
PRINT #1, "OUTPUT 15;:MEAS:RES?" ' Query TEC DC resistance.
PRINT #1, "ENTER 15"
INPUT #2, R
PRINT "TEC DC resistance:"; R
PRINT #1, "OUTPUT 15;:MEAS:VOLT?" ' Query TEC voltage.
PRINT #1, "ENTER 15”
INPUT #2, R
PRINT "TEC voltage:"; R
'
'Step 8: Turn off output.
PRINT #1, "OUTPUT 15;:OUTP OFF"
PRINT "Done."
END