1-6 Getting Started Models 2510 and 2510-AT User’s Manual
Annunciators:
EDIT Instrument in edit mode.
ERR Questionable reading, invalid cal step.
REM Instrument in GPIB remote mode.
TALK Instrument addressed to talk over GPIB.
LSTN Instrument addressed to listen over GPIB.
SRQ Service request over GPIB.
4W Indicates 4-wire sense mode enabled.
ARM Operations being performed.
REAR Ground connect mode enabled.
* Setpoint tolerance reached.
Power controls:
OUTPUT Turns the control source OUTPUT on or off. Integrated red/green/yellow
indicator shows heating/cooling status.
POWER Turns main unit power on or off.
Handle:
Pull out and rotate to desired position.
To Next Page
Loading...
