Section 7: TSP command reference Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-126 2657A-901-01 Rev. B/December 2012
Also see
lan.lxidomain (on page 7-117)
lan.trigger[N].clear()
(on page 7-126)
lan.trigger[N].mode
(on page 7-130)
lan.trigger[N].overrun
(on page 7-131)
lan.trigger[N].stimulus
(on page 7-132)
lan.trigger[N].wait()
(on page 7-134)
Understanding hardware value and pseudo line state
(on page 3-50)
lan.trigger[N].clear()
This function clears the event detector for a trigger.
Type TSP-Link accessible
Affected by Where saved Default value
Function Yes
Usage
lan.trigger[N].clear()
N
The LAN event number to clear (1 to 8)
Details
The trigger event detector enters the detected state when an event is detected. This function clears a trigger
event detector and discards the previous history of the trigger packet.
This function clears all overruns associated with this LAN trigger.
Example
lan.trigger[5].clear()
Clears the event detector with LAN packet 5.
Also see
lan.trigger[N].assert() (on page 7-125)
lan.trigger[N].overrun
(on page 7-131)
lan.trigger[N].stimulus
(on page 7-132)
lan.trigger[N].wait()
(on page 7-134)
To Next Page
Loading...
Need help?
General
