Keithley 2657A - Scriptvar.save(); Scriptvar.source

Model 2657A High Power System SourceMeter® Instrument Reference Manual Section 7: TSP command reference
2657A-901-01 Rev. B/December 2012 7-167
scriptVar.save()
This function saves the script to nonvolatile memory or to a USB flash drive.
Type TSP-Link accessible
Affected by Where saved Default value
Function No
Usage
scriptVar.save()
scriptVar.save(filename)
scriptVar
The name of variable that references the script
filename
The file name to use when saving the script to a USB flash drive
Details
The scriptVar.save() function only saves a script to nonvolatile memory or a USB flash drive.
If no filename is given, the script will be saved to internal nonvolatile memory. Only a named script (the script's
name attribute is not an empty string) can be saved to internal nonvolatile memory. If a filename is given, the
script will be saved to the USB flash drive.
You are not required to add the file extension, but if you would like to, the only allowed extension is .tsp (see
Example 2).
Example 1
test8.save()
Saves the script referenced by the variable
test8 to nonvolatile memory.
Example 2
test8.save("/usb1/myScript.tsp")
Saves the script referenced by the variable
test8 to a file named myScript.tsp on your
flash drive.
Also see
Save a user script (on page 6-8)
scriptVar.source
This attribute contains the source code of a script.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW)
(see Details)
No Not applicable Not saved Not applicable
Usage
code = scriptVar.source
scriptVar.source = nil
scriptVar
The name of the variable that references the script that contains the source code
code
The body of the script