Keyence IV2 Series - Confirming the router settings

A-28
IV2 Series User’s Manual (Control Panel)
Remedy when data transfer to the SD card is unavailable
Conrming the router settings
Whenarouterisused,conrmthatthefollowingportis
opened.
Sensor : 63000 (default value)
For the method to set the sensor port number, refer
to the following.
“Network Settings (Sensor)” (Page 7-21)

BOOTPisxedas67or68.

The FTP port number can be changed on the
server. It is generally 20 or 21.

The SNTP port number can be changed on the
server. It is generally 123.
A