Keyence IV2 Series - Version of the IV2 series; Operation Software for the Sensor; Operation Software for the Control Panel; Revision history of Software Version

6
IV2 Series User's Manual (Control Panel)
Version of the IV2 series
You can download the most recent operation software for the sensor (IV2-G150MA, IV2-G500MA, IV2-G500CA, IV2-
G300CA, IV2-G600MA) and control panel (IV2-CP50) from the KEYENCE web site.
Please refer to the description on the homepage for the introduction method.
URL : http://www.keyence.com/
Operation Software for the Sensor
Version Description
R1.30.** This is the version of this document.
Operation Software for the Control Panel
Version Description
R1.30.** This is the version of this document.
Revision history of Software Version
Version Description
R1.00.** The initial version.
R1.10.**

The following functions are added.

Color/Brightness Average tool, Color/Brightness Prohibition Tool

Brightness correction

PROFINET, TCP/IP non-procedural communications, Communication Unit (DL Series)

Web Monitor

Addasupportedlanguages(German/Chinese(Simplied)/Korean).

Change the setting range of Trigger Delay from 1000 ms to 10000 ms.

Change the maximum number of characters for the [Folder] in [Data transfer (FTP)] from 16 to 128.

Change the maximum number of characters for the [File Name] in [Data transfer (FTP)] from 16 to 128

Add the following functions to the Simulator of IV2-Navigator;
Readtheextendedprograms,addaimagele,deleteaimage,additionalLearning
R1.20.**

Add supported languages (Italian / French / Spanish / Portuguese / Czech / Hungarian / Polish / Chinese
(Traditional))
R1.30.**

Add a supported language (Thai)

InitializetheIPaddressofthesensoramplierandaddafunctionforassigningaxedIPaddress.
Version of the IV2 series