Keysight E5260/E5270 User’s Guide, Edition 6 4-19
Front Panel Reference
Setup Menus
Function Tree The setup menu provides the following functions.
• CONFIG
• ADDRESS Sets the GPIB address.
• LINEFREQ Sets the power line frequency.
• REVISION Displays the firmware revision.
• UNIT Displays the module information of each slot.
• SERIAL Displays the serial number of each module.
• MON_ITEM
• ITEM1 Selects the item displayed in the Setup Data 1 area.
• ITEM2 Selects the item displayed in the Setup Data 2 area.
• DSPL_FRMT Selects the data display format, engineering or scientific.
• WAIT_TIME
• SOURCE Sets the source wait time.
• MEASURE Sets the measurement wait time.
• ERROR
• DISPLAY Displays the error code and error message.
• CLEAR Clears the error buffer.
• RMT_DSPL Selects on or off for the remote display mode.
• BEEP Selects on or off for the beeper.
To Next Page
Loading...
Need help?
General
