4-20 Keysight E5260/E5270 User’s Guide, Edition 6
Front Panel Reference
Setup Menus
CONFIG Displays the sub menu that provides the following functions.
• ADDRESS
Displays the following message.
GPIB Address = Address
Press the arrow key to set the desired GPIB address. Then, press the
Enter
key to
make the setup effective, or press the
Exit
key to cancel changing the setup.
• LINEFREQ
Displays the following message.
Line Frequency: 50Hz or 60Hz
Press the arrow key to select the power line frequency, 50 Hz or 60 Hz. Then
press the
Enter
key to make the setup effective, or press the
Exit
key to cancel
changing the setup.
• REVISION
Displays the following message.
FW: X.XX.XX AD: YY.YY
where X.XX.XX shows the firmware revision and YY.YY shows the revision
number of the A/D converter (ADC) controller.
To return to the previous menu, press the
Exit
key.
• UNIT
Displays the following message.
Slot#: model, n, description
where # is 1 or 2 for the 2-ch mainframe, 1, 2, ... or 8 for the 8-ch mainframe,
model is the model number, n is the revision number, and description is the
module description.
To display another message, press the arrow key.
To return to the previous menu, press the
Exit
key.
To Next Page
Loading...
Need help?
General
