4-24 Keysight E5260/E5270 User’s Guide, Edition 6
Front Panel Reference
Setup Menus
ERROR Displays the sub menu that provides the following functions.
• DISPLAY
Displays the error code and error message, or No Error. A maximum of four
error messages can be stored.
To return to the previous menu, press the
Exit
key.
• CLEAR
Displays the following message. Then, press the
Enter
key to clear the error
buffer, or press the
Exit
key to cancel this operation.
Clear Error Buffer: YES
RMT_DSPL Displays the following message.
Display in Remote Mode: OFF or ON
Press the arrow key to set the remote display mode ON or OFF. Then, press the
Enter
key to make the setup effective, or press the
Exit
key to cancel changing the setup.
This function changes the display items in the remote mode. If it is ON, the LCD
displays the measured data, setup data, and all status information. If it is OFF
(default setting), the LCD displays only a part of the status information. See
“Display Images” on page 4-3 and “Status Data Area” on page 4-9.
Note that setting this function ON may adversely affect the performance such as the
measurement speed.
BEEP Displays the following message.
BEEP: ON or OFF
Press the arrow key to set the beeper ON or OFF. Then, press the
Enter
key to make
the setup effective, or press the
Exit
key to cancel changing the setup.
To Next Page
Loading...
Need help?
General
