4-28 Keysight E5260/E5270 User’s Guide, Edition 6
Front Panel Reference
Setup Menus
SELFTEST Displays the sub menu that provides the following functions.
• EXECUTE
Displays the following message.
Selftest: ALL
Press the arrow key to select the test item. Then, press the
Enter
key to start the
self-test, or press the
Exit
key to return to the previous menu without performing
the self-test.
During the self-test, the following message will be displayed.
Press [Exit] to abort
Then, press the
Exit
key to abort the self-test. Or wait until the self-test is
completed and the following message is displayed.
Selftest: Pass or Fail
Press the
Exit
key to return to the previous menu.
• RESULT
Displays the following message.
FRAME: Pass or Fail Error No.
Press the arrow key to display the result of another slot as shown below.
Slot#: Pass or Fail Error No.
where # is 1 or 2 for the 2-ch mainframe, 1, 2, ... or 8 for the 8-ch mainframe,
and Error No. is the error number.
Press the
Exit
key to return to the previous menu.
• RECOVER
Displays the following message.
Recover Module: YES
Then, press the
Enter
key to use the failed modules, or press the
Exit
key to
cancel this operation.
To Next Page
Loading...
