Keysight Technologies E5260 Series User Manual

1-8 Keysight E5260/E5270 User’s Guide, Edition 6
Getting Started
Step 8. Stopping source output and measurement
1. Press the
On/Off key. The SMU2 stops source output and measurement.
2. Press the
OutCh key repeatedly until the S-ch status area displays 1. The SMU1
setup information is displayed in the Setting Parameter area.
3. Press the
MeasCh key repeatedly until the M-ch status area displays 1. The
SMU1 measurement data is displayed in the Meas Value area.
The LCD changes the display as shown below. The following data is just an
example.
4. Press the
On/Off key. The SMU1 stops source output and measurement.
Meas Value #1 Meas Value #2 Setting Parameter
Stat
OUT: 1.500 V
CPL: 100.0mA
OFF
Remot e
A 2 2
Shift
Lock
Meas
Trigger
Error
Integ
Re pe a t
Ou tput
S-ch
M-ch
Meas Value #1 Meas Value #2 Setting Parameter
Stat
OUT: 0.00 V
CPL: 100.0mA
OFF
Remot e
A 2 1
Shift
Lock
Meas
Trigger
Error
Integ
Re pe a t
Ou tput
S-ch
M-ch
Meas Value #1 Meas Value #2 Setting Parameter
Stat
OUT: 0.00 V
CPL: 100.0mA
0.00030nA
Remot e
A 1 1
Shift
Lock
Meas
Trigger
Error
Integ
Re pe a t
Ou tput
S-ch
M-ch
Meas Value #1 Meas Value #2 Setting Parameter
Stat
OUT: 0.00 V
CPL: 100.0mA
OFF
Remot e
A 1 1
Shift
Lock
Meas
Trigger
Error
Integ
Re pe a t
Ou tput
S-ch
M-ch

Keysight Technologies E5260 Series Specifications

General

Brand	Keysight Technologies
Model	E5260 Series
Category	Measuring Instruments
Language	English