DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
109 of 180
30020 The PLATE HANDLER determined that a motion error of the SLOW SCAN
AY occurred.
30021 The ERASE operation did not occur.
30022 The DUPLEX CAM did not move to the PINCH position in the time allowed.
30023 The DRIVE ROLLERS did not execute the “Load” operation in the time
allowed.
30024 The DUPLEX CAM did not move to UNLATCH position in the time allowed.
30025 The DUPLEX CAM did not move to LATCH position in the time allowed.
30026 The DRIVE ROLLERS did not execute the UNLOAD operation in the time
allowed.
30027 The DUPLEX CAM did not move to UNPINCH position in the time allowed.
30028 The PLATE HANDLER did not execute the LOAD PLATE operation in the
time allowed.
30029 The PLATE HANDLER did not execute the SCAN PLATE operation in the
time allowed.
30030 The PLATE HANDLER did not execute the EJECT PLATE operation in the
time allowed.
30031 The DUPLEX CAM did not execute the MOVE TO HOME operation.
30032 The PLATE HANDLER did not execute the HOME SLOW SCAN operation in
the time allowed.
30033 The DUPLEX CAM did not execute the MOVE TO HOME operation in the
time allowed.
Code Description
To Next Page
Loading...
Need help?
General
