Kodak DirectView CR 825 User Manual

DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
75 of 180
12112 - SLOW SCAN did not move
12113 - SLOW SCAN CONTROLLER BOARD A6: NVRAM malfunctioned
12115 - SLOW SCAN CONTROLLER BOARD A6: Software Error
12116 - SLOW SCAN CONTROLLER BOARD A6 did not communicate with
MSC
Cause: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action: Do the checkout for the SLOW SCAN CONTROLLER BOARD A6 and COIL
BOARD A7.
Cause: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action: Do the checkout for the SLOW SCAN CONTROLLER BOARD A6 and COIL
BOARD A7.
Cause 1: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action: Do the checkout for the SLOW SCAN CONTROLLER BOARD A6 and COIL
BOARD A7.
Cause 2: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Description: The SLOW SCAN AY did not stop moving before the next command to
move. This error indicates a communication error with the SLOW SCAN
CONTROLLER BOARD A6.
Cause 1: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action: Do the checkout for the SLOW SCAN CONTROLLER BOARD A6 and COIL
BOARD A7.
Cause 2: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.

Kodak DirectView CR 825 Specifications

General

Brand	Kodak
Model	DirectView CR 825
Category	Medical Equipment
Language	English