Kodak DirectView CR 825 User Manual

DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
86 of 180
13010 - Erase time exceeds maximum allowed
13011 - Command to Erase did not occur
13012 - MSC BOARD A1: Invalid Command for ERASE LAMPS
13013 - MSC BOARD A1: Software failure during erase
13899 - General Erase Error
POWER SUPPLY
14001 - SLOW SCAN: Malfunction of 24 V Power
Cause: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Cause: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Cause: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Description: The software did not provide the RTXC TIMER during the ERASE
function.
Cause: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Cause: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Description: The 24 V DC CIRCUIT BREAKER of the SLOW SCAN is open.
Cause: Malfunction of the 24 V DC power distribution.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.

Kodak DirectView CR 825 Specifications

General

Brand	Kodak
Model	DirectView CR 825
Category	Medical Equipment
Language	English