Konica Minolta 240f - Page 138

F-code communications
5
5-22 Konica Minolta 240f
5.4
13 Enter the password using the numeric keys, and press [Enter].
14 Press [Enter].
% To continue to register or edit Secure F-code boxes, repeat the procedure in steps 4 to 13.
Registering/editing F-code bulletin boxes
This section describes the procedure for registering F-code bulletin boxes. When editing, select the box you
want to edit in step 4, and press [Edit]. If an I.D. code is set, enter the I.D. code. Select the item you want to
edit.
1 Press <Setting>.
2 Press [Register].
3 Press [F-Code Box].
4 Press [Add].
% When editing, select the box you want to edit, and press [Edit].
5 Press [Bulletin Box].
6 Enter the sub-address using the numeric keys, and press [En-
ter].