Konica Minolta 240f - Page 141

Konica Minolta 240f 5-25
5.4 F-code communications
5
Deleting F-code boxes
1 Press <Setting>.
2 Press [Register].
3 Press [F-Code Box].
4 Select the box you want to delete, and press [Delete].
5 If an I.D. code is set, enter the I.D. code using the numeric keys, and press [Enter].
% If an I.D. code is not set, proceed to the next step.
6 Press [Yes].
% Press [No] to close the screen without deleting the box.
% To continue to delete F-code boxes, press [Enter], and repeat the procedure in steps 4 to 7.
Printing the F-code box list
1 Press <Setting>.
2 Press [Register].
3 Press [F-Code Box].
4 Press [List].
5 Select [ON] to enable duplex printing, or [OFF] to disable it.
6 Select [ON] to enable combined printing, or [OFF] to disable it.