F-code communications
5
5-28 Konica Minolta 240f
5.4
6 Enter the sub-address registered in the other machine using
the numeric keys, and press [Enter].
% Up to 20 digits can be entered for a sub-address.
% To delete one of the entered digits, press [Clear].
% To delete all of the entered digits, press [All Clear].
7 If a password is set, press the password entry box.
% If a password is not set, proceed to step 9.
8 Enter the password using the numeric keys, and press [Enter].
% Up to 20 digits can be entered for a password. Numerals,
# and * can be entered.
9 Press [Enter].
% Press [F-Polling] again to return to the screen in step 4, where you can correct the sub-address
and/or password if entered incorrectly.
10 Press [Close].
11 Specify the destination, and press <Start>.
% For details on specifying the destination, refer to page 6-3.
To Next Page