Specifying default settings
8
8-36 Konica Minolta 240f
8.2
7 Press [Close].
% To continue to change other default values, repeat steps 4 to 7 of the operation.
List of default e-mail settings
d
Highlighted values are the default settings specified at the time of shipment.
For details on these settings, refer to page 8-35.
List of default internet fax settings
d
Highlighted values are the default settings specified at the time of shipment.
For details on these settings, refer to page 8-35.
Function Description Settings Refer-
ence
page
FileFormat This sets the default file for-
mat used when a scanned
document is saved. In the
default settings for PDF
w/ Password, you can set
the encryption level and re-
strictions with a permis-
sions password.
If you have changed the file
format in the default scan-
ner settings, that setting is
also changed. (page 8-33)
Mono
TIFF
PDF
PDF w/ Password
Color
JPEG
PDF
PDF w/ Password
PDF w/ Password
• Encryption Level:
Low (40-bit RC4)
,
High (128-bit RC4),
High (128-bit AES)
•Printing:
Allowed
, Not allowed
•Editing:
Allowed
, Not allowed
•Copying:
Allowed
, Not allowed
p. 3-23
Batch Scan Set the default batch scan
setting.
ON
OFF
p. 3-21
Function Description Settings Refer-
ence
page
FileFormat This sets the default file format used when a transmitting
data via Internet Fax.
• TIFF-S: The simple mode TIFF format. Documents are all
converted to A4 size, 200 dpi for transmission.
• TIFF: The full mode TIFF format. Documents are transmit-
ted with the document size and resolution set when scan-
ning.
• PDF: Documents are transmitted in the PDF format.
TIFF-S
TIFF
PDF
p. 5-58
Batch Tx Set the default batch transmission setting.
ON
OFF
p. 5-57
To Next Page
Loading...
