11-14 Key Operator Mode
Key Operator Mode
Copier Initial [2] (continued)
Output [5] (continued)
1 Press [HELP] to display the Help Screen, then touch Key-Ope mode.
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen.
3 Touch 5. Output to display the Output Mode Initial Setting Screen.
4 For the machine with Finisher, perform the following operation and proceed to step
6.
To select the exit tray, touch TRAY 1, TRAY 2, or TRAY 3.
NOTE: If TRAY 1 is selected, SORT, GROUP and STAPLE are automatically dimmed. If TRAY2 or TRAY3
is selected, Face UP TRAY 1 is automatically dimmed.
To select the Output mode, touch SORT, GROUP, STAPLE, or Face UP TRAY 1.
NOTES:
1. If STAPLE is selected, SORT is automatically highlighted.
2. If selecting Non-sort mode, do not highlight any of the SORT, GROUP, STAPLE, and Face UP
TRAY 1.
To select the desired staple location, touch STAPLE SET. Touch the desired location
on the Staple Location Initial Setting Screen, and touch OK.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
5 For the machine without Finisher, perform the following operation and proceed to
step 6.
To select the Output mode, touch Rotation+Sort, Rotation+Group, GROUP, or Face
UP
.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
6 Touch OK on the Output Mode Initial Setting Screen to complete the setting and
return to the Copier Initial Setting Menu Screen. If other copier initial setting changes
are required, touch the desired key.
7 Touch RETURN to restore the Key Operator Mode Screen. If other key operator
settings are required, touch the desired key.
8 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
To Next Page