Specifications
14-2 Machine Specifications
Specifications Subject To Change Without Notice
Product Name Konica 7045
Configuration Console with stationary platen
Photoreceptor OPC drum
Method Laser Electrostatic
Toner Black, cartridge type
Recommended Operating Environment 50°~86°F (10°~30°C); 10~80% RH
Warm Up Approx. 90 sec. @68°(20°C); 50% RH
Auto Reset Off/30 sec./1 min./1.5 min./2 min./2.5 min./
3 min./3.5 min./4 min./4.5 min./5 min.
First Copy Out Time From Platen Glass:
3.9 sec. for 8.5"x11"
Copy Rate 45 cpm: 8.5"x11"
32 cpm: 8.5"x11"R
27 cpm: 8.5"x14"
23 cpm: 11"x17"
41 cpm: 5.5"x8.5"
Continuous Copy 1~999 copies
Copier Power Source 120V±10%/15A; 60Hz±2.5Hz
Power Consumption Max. 1,500VA (full option)
Copying: 1,300 VA (full option)
Noise Level (full system) Approx. 59 dB (A) or less, during copying
Automatic Modes AMS; AES (plus 9-level manual density);
APS detects 11"x17", 8.5"x14", 8.5"x11"R,
8.5"x11", 5.5"x8.5"
Magnification
Presets; 0.50, 0.65, 0.77, 1.00, 1.29, 1.55, 2.00
3 User Sets - 0.25~4.00, set by key operator
Zoom range - 0.25~4.00 in 1% steps
Originals on Platen Max. size: 11"x17" (280mmx432mm)
To Next Page
Loading...
