Konica Minolta 7045 - Non-Sort Mode

Output Modes
7-4 Output Modes
Non-Sort Mode
The Non-sort mode simply means that the offset-stacker finisher modes are not
selected. Copies will be stacked on the Finisher upper/middle/lower tray without being
offset by sets.
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A4R, A4
(5.5"x8.5" is available in the horizontal feeding direction (
) only)
❒ Paper capacity for 20 lb: Finisher upper tray
100 sheets (11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"R, A4R, A4)
10 sheets (thin/thick paper, transparency film, etc.)
Finisher middle/lower tray
700 sheets (8.5"x11", 8.5"x11"R, A4R, A4)
300 sheets (11"x17", 8.5"x14", 5.5"x8.5"R)
Output Mode Screen
5
6
3
4
1
2
Control panel
OUTPUT
APPLICATION
CHECK
JOB MEMORY
HELP
2
1
5
4
8
7
0