Copier Management 5-3
Copier Management
Power Saver Mode (continued)
Manual Shut-Off
Press [POWER SAVER ON/OFF]. The [POWER SAVER ON/OFF] LED will light and all other
LEDs and the LCD screen will be turned off.
Release Manual Shut-Off
Press [POWER SAVER ON/OFF]. The Manual shut-off will be released, with the [POWER
SAVER ON/OFF
] LED turned off and the LCD screen displayed.
Auto Shut-Off
This function automatically shuts off the main power after a specified period of copier
inactivity.
The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240
minutes. Initially, Auto shut-off is set to function after 60 minutes of copier inactivity. For
the key operator setting, see p. 11-44 to p. 11-45.
Release Auto Shut-Off
Press [POWER SAVER ON/OFF]. The copying operation will be available.
To Next Page