Basic Operations 6-11
Basic Operations
Lens Mode (continued)
Zoom Mode
Use the Zoom mode to reduce or enlarge the copied original image in 1% increments.
❒ Zoom range: 0.25~4.00
❒ Incompatible Basic Copying Conditions: AMS
❒ Incompatible Applications: Repeat mode in Repeat, Reduce & Shift in Image Shift
1 Touch ZOOM to display the popup menu for setting the zoom ratio.
2 Use keypad on the popup menu to enter the desired reduction or enlargement ratio
in 3 digits; or use arrows to scroll to the desired ratio.
NOTE: If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
3 When the desired ratio is specified, touch OK to complete the setting. The popup
menu disappears automatically.
To cancel the setting after returning to the Basic Screen, touch ZOOM again, enter
the desired ratio, then touch OK.
Basic Screen
Zoom key
To Next Page