Output Modes
7-6 Output Modes
Sort Mode
The Sort mode is available when the offset-stacker finisher is installed. Use this mode
when you want to output multiple copies of the original set, and have each set offset on
the Finisher middle/lower tray. The staple mode can be selected with the sort mode.
Each copied set will offset in the stack tray.
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A4R, A4
(5.5"x8.5" is available in the horizontal feeding direction (
) only)
❒ Paper capacity for 20 lb: Paper exits to the middle/lower tray only.
700 sheets (8.5"x11", 8.5"x11"R, A4R, A4)
300 sheets (11"x17", 8.5"x14", 5.5"x8.5"R)
❒ Incompatible: Using platen glass (Platen memory copy can use platen glass), Group,
Transparency Interleaving mode of Special Paper
Output Mode Screen
1
2
3
1
2
3
1
2
3
1
2
3
30mm
Control panel
OUTPUT
APPLICATION
CHECK
JOB MEMORY
HELP
To Next Page