Safety Information 2-5
Safety Information
Machine Labels (continued)
• Avoid getting burned.
Do not touch any machine area that you are advised not to touch by a caution label.
• Do not remove warning/caution labels.
If any caution label is removed or if any warning/caution label or caution indicator is
illegible due to soilage, clean the label. If cleaning does not render the label legible,
please contact your Konica service representative.
FS-109 Finisher
CAUTION:
To avoid injury when the
Finisher middle exit tray
moves up and down, DO
NOT PUT your hand into
the two portions of the
closing area.
CAUTION:
DO NOT INSERT your
finger into the two staple
driving portions or into
the grooves of the paper
exit lever, otherwise you
may be injured.
To Next Page