6-14 Basic Operations
Basic Operations
Lens Mode (continued)
Vertical/Horizontal Zoom (continued)
1 Touch ZOOM to display the popup menu for setting the zoom ratio.
2 Touch the Vertical zoom key ( ) to select a vertical ratio.
3 Use keypad on the popup menu to enter the desired reduction or enlargement ratio
in 3 digits; or use arrows to scroll to the desired ratio.
NOTE: If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
4 Touch the Horizontal zoom key ( ) to select a horizontal ratio.
5 Use keypad on the popup menu to enter the desired reduction or enlargement ratio
in 3 digits; or use arrows to scroll to the desired ratio.
6 When the desired ratios are specified, touch OK to complete the setting. The popup
menu disappears automatically.
To cancel the setting, touch ZOOM again, enter the desired ratios, then touch OK.
Basic Screen
Vertical
zoom key
To Next Page