Konica Minolta BIZHUB 226 - Page 108

Utility settings
7
7-4 bizhub 226
7.1
Settings Contents Reference
page
[MACHINE
SETTING]
[BUZZER
VOLUME]
[DISABLE/
ENABLE]
Specify whether to
sound the machine
status notification
buzzer.
-
[CONFIRMATION] Specify the volume of
the operation confir-
mation sound such
as the input confir-
mation sound, invalid
input sound, or basic
sound.
-
[COMPLETE] Specify the volume of
the successful com-
pletion sound such
as the print operation
completion sound or
fax communication
completion sound.
-
[PREPARATION] Specify the volume of
the completed prep-
aration sound.
-
[CAUTION] Specify the volume of
the caution sound
such as the simple
caution sound levels
1 to 3, or a severe
caution sound.
-
[INITIAL MODE] Select the initial
mode. Select [COPY]
or [FAX].
-
[ADMIN.
MANAGEMENT]
[REMOTE MONITOR] Configure the set-
tings to remotely ac-
cess this machine.
-
[E-MAIL
SETTING 1]
[E-MAIL MODE] Specify the maximum
transmission size,
maximum transmis-
sion resolution, and
compression coding
method when trans-
mitting an Internet
fax.
Select [ADVANCED]
in the [E-MAIL
MODE] screen, and
configure each set-
ting.
Each set-
ting can be
configured
when
transmit-
ting an In-
ternet fax.
(p. 5-7)
[E-MAIL
SETTING 2]
[AUTO
RECEPTION]
Configure the setting
to automatically re-
ceive an Internet fax.
p. 5-14
[REPLY ADDRESS] Specify an address to
send a receiving re-
sult report to when a
receiving error oc-
curs.
p. 5-11
[HEADER PRINT] Configure the setting
to send a fax with a
header.
p. 5-12