Konica Minolta BIZHUB 226 - Selecting a Tray; Configuring the Closed Network

bizhub 226 7-27
7.5 Fax RX setting
7
7.5.10 Selecting a tray
1 Press the Utility key.
2 Use +, to select [FAX RX OPERATION], and press the OK key.
3 Use +, to select [SELECT TRAY], and press the OK key.
4 Use +, to select a target tray, and press the OK key.
5 Use +, to select [DISABLE] or [ENABLE], and press the OK key.
This returns to the fax RX settings screen.
7.5.11 Configuring the closed network
1 Press the Utility key.
2 Use +, to select [FAX RX OPERATION], and press the OK key.
3 Use +, to select [CLOSED NETWORK], and press the OK key.
4 Use +, to select [OFF] or [ON], and press the OK key.
This returns to the fax RX settings screen.